As an Amazon Associate I earn from qualifying purchases.
1. SilverStone Technology #ad
SilverStone Technology Silverstone 8-Port PWM Fan Hub/Splitter for 4-Pin & 3-Pin Fans in Black SST-CPF04-USA Newest Version #adSilverStone Technology #ad
- 1-to-8 pwm connectors. Support speed detection for accurately controlling fans. Included 3m adhesive to apply anywhere within your case. Compact size at only 54mm w x 19mm h x 40mm D.
2200μf capacitor provides stable voltage. Attached 3 pin fans will run at maximum RPM. Pwm 4pin header x 8, compatible with 3pin cable Speed control function is unavailable for 3 pin fans.
2. Noctua #ad
4-Pin PWM Fan Controller Black, Noctua NA-FC1 #adNoctua #ad
- Compact, highly flexible controller for 4-pin PWM fans. Works as a manual speed reducer or in tandem with the automatic motherboard fan control: achieve truly quiet operation, even with high-speed PWM fans such as Noctua’s industrialPPC series.
6-year manufacturer’s warranty. Includes a 3-way splitter cable for controlling up to 3 fans simultaneously. No stop” mode: prevents the fan from falling below a speed of 300rpm in order to avoid BIOS fan errors.
3. DEEP COOL #ad
Occupying only One 4-pin Motherboard Header, DEEPCOOL FH-10 Integrated Fan Hub, Powering up to 10 Fans 3-pin Non-PWM or 4-pin PWM #adDEEP COOL #ad
- Powered by a stable sata connection to the system PSU for up to 10 fans. Only speed of Fan 1 can be identified by the system. If 3-pin non-pwm fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function.
If 4-pin pwm fans are connected to this fan hub, duty ratio of all pwm fans can be adjusted at the same time. Velcro and screw mountings applicable for the tower interiors. That is, all pwm fans will run at the same DUTY RATIO. They will run at FULL SPEED. Capable of connecting to 10 PC fans simultaneously for cooling the computer system.
|Brand||DEEP COOL #ad|
|Manufacturer||DEEP COOL #ad|
4. BUYMINERS.CA #ad
Chassis Fan Hub CPU Cooling 10 Port 12 V SATA to Fan-Header with 4 Pin PWM Controller Efficient Chassis Adhesive Computer Cooling System Dedicated Supply from PSU to Link Multiple Points #adBUYMINERS.CA #ad
- No frills, all function - strong wire connections and clean sleeving are part of our simple, cost effective design. The red port on our pwm fan controller allows the operating system to adjust fan speed based on temps.
The 12v fan controller accurately controls 4-pin fan speed from a single case input. Cooling when you need it - quiet when you don't. Money back warranty - all of our products are backed by a manufacturer's warranty, and we will go the extra mile to make things right.
Take care during installation to avoid bending the pins and capacitor. Easy to install - just plug the sata fan controller into the motherboard and connect to the PSU.
Manages multiple fans - if your motherboard lacks fan interfaces, our pwm fan hub is the neat and tidy way to expand. Double-sided adhesive mounts the pc fan hub to any flat surface and the screw hole allows it to be fixed to the chassis. The pwm fan hub then matches the power level for the other ports. If you are unhappy for any reason, contact us for a full refund.
5. AC Infinity #ad
MULTIFAN, AC Infinity Controller 2, Controls AIRPLATE, for AV Cabinet Cooling, Fan Thermostat and Speed Controller, USB Fans and Devices #adAC Infinity #ad
- Automated programming that self-adjusts cooling power in response to changing temperatures. Features an alarm system, two buffer options, six fan speeds, display lock, and power failure memory.
Intelligent thermal fan controller with on-board processor and digital LCD display. Complete kit includes precision thermal probe, mounting screws, and power wall adapter. Controls up to six ac infinity Cabinet and USB Fans, see below for compatibility.
|Brand||AC Infinity #ad|
|Manufacturer||AC Infinity #ad|
6. Comidox #ad
Comidox 2PCS DC 12V 4 Wire PWM PC CPU Fan Temperature Control Speed Controller Module CPU High-Temp Alarm #adComidox #ad
- It can be turned on with the three-wire fan monitoring function stall warning. Supports all internal 12v 5a fans, synchronous rectified output, high efficiency, no need for additional heat sinks even for high current operation.
Circuit load capacity: 5A for each output and 8A for bus current. Output range: 20%-100% for the first channel, 10%-100% for the second channel and the third channel.
Note: the above range is only applicable to the pwm range, or 40%-100% for the first channel TFL = ON, the actual control effect will vary depending on the fan. Multiple fans can be used in parallel total current does not exceed 5A, temperature control speed has four temperature zone settings, support automatic temperature control and air cooling speed control, widely used.
7. Fancasee #ad
Black, Fancasee 4-Pin PWM Fan Power Supply Cable 1 to 5 Splitter 5 Way PC Case Internal Motherboard Fan Power Extension Cable Cord Wire for ATX Computer Case 4-Pin and 3-Pin Cooling Fans 13 inch #adFancasee #ad
- Widely compatible: support 4-pin and 3-pin fans cable, the 1 to 5 splitter 5 way fan power extension cable compatible with 4-pin and 3-pin PC case motherboard fans. Black sleeved nylon braided cable, more durable and make the internal of pc case looks more clean & tidy.
The extension cable offers greater flexibility between motherboard and CPU cooling fans. Excellent 1 to 5 splitter 5 way 4-pin PWM fan power supply extension cable cord, better power supply for PC computer case internal motherboard fans. Plug-n-play, easy to plug; 5 way 4-pin male connector jack fan hub cable.
8. Electop #ad
Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller #adElectop #ad
- The ten fans will spin at the same speed, that designated by the system for that fan. Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%. For both 4-pin and 3-pin fans. So, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the "source" fan.
Red is expected to be a pass through for the cpu fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting. Since the mainboard can only receive one rotation speed signal, but no speed signal.
Please note 4pin fan speed can be adjusted by temperature control. Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. In the hub interfaces, the remaining nine conventional fan interfaces have the PWM function, the RED CPU interface is the CPU fan dedicated interface with speed detection function. There is eva double-sided adhesive at the back of the hub, which can be easily affixed to a flat place.
9. Kingwin #ad
Overheat Alarm, and Fan RPM Display. Fits 5.25” Bay, Temperature Monitor, Turn Knob Control, Kingwin Performance 4 Channel Fan Controller Panel w/ Wide LCD Display, and Easy Control of Your PC Fans #adKingwin #ad
- Wide viewing LCD Display. Temperature Monitor. 4 channel Fan Controller. Dial Control. Fan rpm Display.