As an Amazon Associate I earn from qualifying purchases.
PGYTECH #ad - Unlike other holders, the PGY Tech doesn't use the data connector of either device to connect, avoiding damage. Non-slip design - the anti-slip silicone material prevents slip of your photographic equipment while you're shooting.
Easy to operate - attach your dji pocket 2 / osmo pOCKET to your mobile phone quick and easy; DJI pocket 2 accessories.
Smatree #ad - Note:1. The knob is connected to the smatree charging stick and cannot be reomved. The powerstick built-in safety system fully protects the charger from short circuit, over-current, Low- voltage and overheat. Non-stretchable）. Durable material: 180mm soft silicone rubber hand grip with 1/4 standard Screw port at the bottom allows universal tripod to be attached.
Large capacity:built-in rechargeable 5000mah battery supply, it can charge about 2 times for DJI OSMO Pocket. Efficiently extend your shooting time. Please fully insert the Pocket / Pocket 2 into the charger base when charging.
There are two combinations: combination 1 - powerStick + Convertible charging base; Combination 2 - PowerStick + Convertible knob + OSMO Pocket phone holder set. 2. If you want to change the charging base to the phone/osmo pocket holder, all you need to do is to loosen the charging base by turning the knobinstead of taking it off to the left, there is no need to remove the knob, and then insert the holder and tighten it to the right. Besides, for you can tighten or loosen the holder for osmo pocket & phone/ charing base to the right/left.
PellKing #ad - Foldable design：rotating foldable design, Comfortable in the pocket, Easy to carry. Perfect fit for dji osmo pocket/pocket 2:precise cnc cutting technology makes the phone holder perfect fit for camera and your phone, attach your Osmo Pocket/Osmo Pocket 2 to your mobile phone quick and easy.
Expanding usage：expand your capabilities by attaching a fill light, A microphone, a tripod or other equipment through the cold shoe connector or 1/4 screw hole expanding your Osmo pocket connections.
PGYTECH #ad - Expanding usage - expand your capabilities by attaching a camera light, A microphone, a tripod or other equipment through the cold shoe connector or 1/4 screw hole expanding your Osmo pocket connections.
Foldable flat design - convenient storage - rotating foldable design, Comfortable in the pocket, Easy to carry. Bullet Point. The pgytech osmo pocket phone holder+ can effectively fix the OSMO Pocket with a mobile phone to avoid accidental damage of the data plug.
Ztylus #ad - Universal compatibility: the smartphone rig fits most of the smartphones on the market such as iphone xs max, s7, 8 Plus, Samsung Galaxy S9 Plus, 5S, S8, 7 Plus, XS, XR, 7, 5C, 6s plus, X, S9, Note 8, 8, S6, Google Pixel, SE, S7 Edge, GoPro action camera and so on.
Perfect for live-streaming, vlogging, it allows you to attach video recording accessories such as microphone, interviews, performances and more.
Extra support: hold the dji osmo pocket more securely with the clip mount, prevent to damage the data connector. Standard 1/4"-20 thread: compatible with tripod, monopod, camera dolly slider, selfie stick, Arca Swiss plate. Standard cold shoe mount: with an integrated cold shoe mount on the top, led light, and audio mixer.
PellKing #ad - All metal made:the pellking osmo pocket Phone holder made of aluminium alloy. Surface by high quality paint，Prevent scratching. Perfect fit for dji osmo pocket/pocket 2:precise cnc cutting technology makes the phone holder perfect fit for camera and your phone, attach your Osmo Pocket/Osmo Pocket 2 to your mobile phone quick and easy.
Non-slip design:the pellking Osmo Pocket phone holder adopts anti-slip silicone pad prevents slip of your photographic equipment while you're shooting.
JJC #ad - Designed for dji osmo pocket 2 / osmo pocket and cell phone: the holder bracket can effectively fix the DJI OSMO Pocket 2 / OSMO Pocket with a smart phone to avoid damaging the data plug. Moreover, it ensures a comfortable grip, a free wrist strap is included in the package.
Comfortable grip & wrist strap: when you install the handheld tripod, frees your hands and does not affect the use of the buttons of your devices. Adjustable clip:the adjustable clip can be adjusted from 2.
Two 1/4"-20 female thread & cold shoe mount & bubble level:attachable to regular sized tripod and stand, and microphones with a standard shoe, cold shoe mount at the top allows you to mount most LED lamps, flashes, bubble level allow you check whether your phone is in a horizontal position. Made of premium material, this bracket is sturdy and durable.
1. PGYTECH
#adPGYTECH OSMO Pocket / OSMO Pocket 2 Phone Holder Plus
#adEasy to operate - attach your dji pocket 2 / osmo pOCKET to your mobile phone quick and easy; DJI pocket 2 accessories.
More information #ad
Foldable flat design - convenient storage - rotating foldable design, Comfortable in the pocket, Easy to carry. Expanding usage - expand your capabilities by attaching a camera light, A microphone, a tripod or other equipment through the cold shoe connector or 1/4 screw hole expanding your Osmo pocket connections. Bullet Point.| Brand | PGYTECH #ad |
| Manufacturer | PGYTECH #ad |
| Height | 0.55 Inches |
| Length | 2.48 Inches |
| Weight | 0.23 Pounds |
| Width | 2.2 Inches |
| Part Number | D-18C-029 |
| Model | P-18C-029 |
More information #ad
2. Smatree
#adHandheld Smartphone Holder Mount Bracket for Osmo Pocket Camera, Smatree Portable Osmo Pocket 2 PowerStickPower Bank Compatible for DJI Osmo Pocket 2 & DJI Osmo Pocket
#adLarge capacity:built-in rechargeable 5000mah battery supply, it can charge about 2 times for DJI OSMO Pocket. Efficiently extend your shooting time. Please fully insert the Pocket / Pocket 2 into the charger base when charging.
More information #ad
）. High-speed charging : 5v/2a type-c output port for osmo pocket or smartphone. Fully charging the osmo Pocket need about 90 mins, Shorter than original charging case. Fully charges itself about 4 hours not use the OSMO Pocket. There are two combinations: combination 1 - powerStick + Convertible charging base; Combination 2 - PowerStick + Convertible knob + OSMO Pocket phone holder set. 2. If you want to change the charging base to the phone/osmo pocket holder, all you need to do is to loosen the charging base by turning the knobinstead of taking it off to the left, there is no need to remove the knob, and then insert the holder and tighten it to the right. Besides, for you can tighten or loosen the holder for osmo pocket & phone/ charing base to the right/left.
| Brand | Smatree #ad |
| Manufacturer | Smatree #ad |
| Part Number | Smatree |
More information #ad
3. PellKing
#adPellking OSMO Pocket 2/OSMO Pocket Phone Holder Phone Clip Compatible with DJI OSMO Pocket Accessories
#adExpanding usage：expand your capabilities by attaching a fill light, A microphone, a tripod or other equipment through the cold shoe connector or 1/4 screw hole expanding your Osmo pocket connections.
More information #ad
Non-slip design:the pellking osmO Pocket phone holder adopts anti-slip silicone pad prevents slip of your photographic equipment while you're shooting. All metal made:the pellking osmo pocket Phone holder made of aluminium alloy. Surface by high quality paint，Prevent scratching.| Brand | PellKing #ad |
| Manufacturer | Pellking #ad |
| Height | 1.97 Inches |
| Length | 12.6 Inches |
| Width | 7.48 Inches |
More information #ad
4. PGYTECH
#adPGYTECH OSMO Pocket Phone Holder Plus Compatible with DJI osmo Pocket 2 /Pocket 1
#adFoldable flat design - convenient storage - rotating foldable design, Comfortable in the pocket, Easy to carry. Bullet Point. The pgytech osmo pocket phone holder+ can effectively fix the OSMO Pocket with a mobile phone to avoid accidental damage of the data plug.
More information #ad
Non-slip design - the anti-slip silicone material prevents slip of your photographic equipment while you're shooting. Unlike other holders, the PGY Tech doesn't use the data connector of either device to connect, avoiding damage.| Brand | PGYTECH #ad |
| Manufacturer | PGYTECH #ad |
| Height | 0.87 Inches |
| Length | 3.03 Inches |
| Weight | 0.23 Pounds |
| Width | 2.56 Inches |
| Part Number | P-18C-029 |
| Model | P-18C-029 |
More information #ad
5. Ztylus
#adStandard Cold Shoe Mount, Osmo Pocket Clip, Cell Phone Tripod Adapter, Cinema Mount Rig for DJI Osmo Pocket: Smartphone Rig, Aluminum Alloy Grip Handle, 1/4"-20 Tripod Thread, Fit Arca Swiss Updated
#adPerfect for live-streaming, vlogging, it allows you to attach video recording accessories such as microphone, interviews, performances and more.
More information #ad
Ultimate versatility: the aluminum alloy hand Grip features male and female 1/4”-20 threaded mounts that give you the power to customize your gear the way you want it. The osmo pocket must be attached to the phone while using the clip mount. Extra support: hold the dji osmo pocket more securely with the clip mount, prevent to damage the data connector. Standard 1/4"-20 thread: compatible with tripod, monopod, camera dolly slider, selfie stick, Arca Swiss plate. Standard cold shoe mount: with an integrated cold shoe mount on the top, led light, and audio mixer.
| Brand | Ztylus #ad |
| Manufacturer | Ztylus #ad |
| Part Number | ZIP-CM-OSMOP-KIT |
More information #ad
6. CYNOVA
#adPocket 2/Osmo Pocket Phone Holder Phone Clip for DJI Pocket 2/Osmo Pocket
#adCYNOVA #ad - Highlights:convenient to hold, the dji Pocket 2 Phone Clip provides stable connection to smartphones 1/4'' thread and cold shoe for expanded shooting options. Compatibility:djI Pocket 2 & Osmo Pocket.More information #ad
Pocket 2 phone clip:provides a more stable connection when DJI Pocket 2 is connected to a smartphone, as well as the 1/4" thread and cold shoe for expanded shooting options. In the box:dji pocket 2 Phone Clip × 1.| Brand | CYNOVA #ad |
| Manufacturer | CYNOVA #ad |
| Weight | 0.2 Pounds |
| Part Number | CY-103002 |
More information #ad
7. PellKing
#adPellking Osmo Pocket/Osmo Pocket 2 Phone Holder Set Expansion Accessories + Universal Mini Extension Pole Tripod Compatible with DJI OSMO Pocket 2/ DJI OSMO Pocket and Smartphone
#adNon-slip design:the pellking Osmo Pocket phone holder adopts anti-slip silicone pad prevents slip of your photographic equipment while you're shooting.
More information #ad
Expanding usage：expand your capabilities by attaching a fill light, A microphone, a tripod or other equipment through the cold shoe connector or 1/4 screw hole expanding your Osmo pocket connections. Package list:pellking dji OSMO Pocket Phone holder + mini universal tripod kit.| Brand | PellKing #ad |
| Manufacturer | Pellking #ad |
| Height | 1.97 Inches |
| Length | 12.6 Inches |
| Width | 7.48 Inches |
More information #ad
8. JJC
#adOsmo Pocket 2 / Osmo Pocket Bracket,Osmo Pocket Phone Holder Clip with Cold Shoe Bubble Level and 1/4''-20 Female Threads, Handheld Phone Holder for DJI Osmo Pocket 2/1
#adComfortable grip & wrist strap: when you install the handheld tripod, frees your hands and does not affect the use of the buttons of your devices. Adjustable clip:the adjustable clip can be adjusted from 2.
More information #ad
2-3. 7"/56-95mm. The locking knob on the back enables you to adjust the position of the clip and helps you pull out your smart phone easily. Anti-slip pads & premium material:the anti-slip pads design can provide your camera and smart phone with better protection. Two 1/4"-20 female thread & cold shoe mount & bubble level:attachable to regular sized tripod and stand, and microphones with a standard shoe, cold shoe mount at the top allows you to mount most LED lamps, flashes, bubble level allow you check whether your phone is in a horizontal position. Made of premium material, this bracket is sturdy and durable.
| Brand | JJC #ad |
| Manufacturer | Jinjiacheng Photography Equipment Co.,Ltd. #ad |
| Part Number | HG-OP1II |
More information #ad
