Top 8 ODROID XU4 eMMC – Computer Power Supplies

As an Amazon Associate I earn from qualifying purchases.

1. Unknown

#ad

ODROID XU4 with Active Cooler and Power Supply

#ad
Unknown #ad - Emmc5. 0 hs400 flash storage. Samsung exynos5422 cortex-a15 2Ghz and Cortex-A7 Octa core CPUs. 2 x usb 3. 0 host, 1 x usb 2. 0 host * gigabit ethernet port * hdmi 1. 4a for display size : 83 x 58 x 20 mm approx. Excluding cooler. Mali-t628 mp6opengl es 3. 1/2. 0/1. 1 and openCL 1. 2 full profile. 2gbyte lpddr3 rAM PoP stacked.
BrandUnknown #ad
ManufacturerHardKernel #ad
Weight0.26 Pounds
Part NumberODROID-XU4

2. ODROID

#ad

ODROID XU4Q with Passive Heathsink and Power Supply

#ad
ODROID #ad - Size : 83 x 58 x 20 mm approx. Excluding heatsink. 2gbyte lpddr3 rAM PoP stacked. Samsung exynos5422 cortex-a15 2Ghz and Cortex-A7 Octa core CPUs. Emmc5. 0 hs400 flash storage. Mali-t628 mp6opengl es 3. 1/2. 0/1. 1 and openCL 1. 2 full profile. 2 x usb 3. 0 host, 1 x usb 2. 0 host * gigabit ethernet port * HDMI 1. 4a for display.
BrandODROID #ad
ManufacturerHardKernel #ad
Weight0.55 Pounds
Part NumberODROID-XU4Q

3. ameriDroid

#ad

64GB eMMC 5.1 Module XU3/XU4 Linux Blue Dot

#ad
ameriDroid #ad - 64gb emmc version 5. 1 interface from Toshiba. Includes emmc to MicroSD adapter module. Compatibility: odroid-xu3/XU3-Lite/XU4. Pre-installed xubuntu 14. 04 or later for odroid-xu3/XU3-Lite/XU4. Jedec/mmca version 5. 1: hs400 interface with 8bit DDR mode.
BrandameriDroid #ad
ManufacturerODROID #ad
Height0.12 Inches
Length0.79 Inches
Weight0.01 Pounds
Width0.59 Inches
Part Number64GB eMMC 5.0 Linux

4. ODROID

#ad

ODROID USB3.0 eMMC Module Writer

#ad
ODROID #ad - Works with odroid orange, Red and Blue eMMC modules. Usb 3. 0 interface. Windows / mac / Linux Compatible. It does not work with the Black eMMC Modules. Use with etcher or Win32DiskImager software on your PC.
BrandODROID #ad
ManufacturerHardkernel Co., Ltd #ad
Part Number.
Model.

5. HCDC

#ad

HCDC RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

#ad
HCDC #ad - 5v blue, so you don't have to worry about it affecting the read and write status of GPIO. 2 x 20 pins expansion pin header, height 8mm/032". Gpio status led and power 5v / 3. 3v indication.

The item has been soldered and assembled. Gpio output or input level high led on, gpios green. Packing list: 1x terminal block breakout module, 4x m2. 5x16mm nylon standoffs, 4x M2. 5x6mm nylon standoffs, 4x M2. 5 nylon nutsnote: the item not include Raspberry Pi Board. The driving current of each LED is only 01ma, output or input level low LED off. Support for raspberry pi a+ 3A+ B+ 2B 3B 3B+ 4B.

Terminal block pitch 3. 5mm/0138", strip length 5mm, wire size range 26aWG to 16AWG, screw m2 steel, pin header and cage copper. The position of the led is in a one-to-one correspondence with the position of the Raspberry Pi 2x20pin connector, 3. 3v red, and the logic level of the GPIO can be observed very quickly and intuitively.
BrandHCDC #ad
ManufacturerXiken Electronic Technology Co., Ltd. #ad
Part NumberHD040

6. XPG

#ad

Works with Playstation 5, PCIe Gen4 M.2 2280 Internal Gaming SSD Up to 7,400 MB/s AGAMMIXS70B-1T-CS, XPG 1TB GAMMIX S70 Blade

#ad
XPG #ad - Form factor: m. 2 2280 *this drive will only work with m/b that supports PCIe 4 PCIe 3 backward compatible. The drive is designed to work with direct installation onto M/B, it may not work with external enclosure.

When paired with PCie 3. 0 port, max r/w will be limited to 3400/3000MB/s. Speed on ps5: under the operating environment of the ps5, the sequential read speed of both 1TB and 2TB models measured at 6100MB/s * To be able to work on PS5, PS5 firmware 21. 02-04. 000042 or higher is required. Interface: pcie gen4 NVMe 1. 4. Speed on pc/laptop: sequential r/w up to 7400/6800mb/s *test performed in adata internal lab, actual performance varies by paired system and testing environment. Backed by a 5-year limited manufacturer warranty.
BrandXPG #ad
ManufacturerADATA #ad
Height0.14 Inches
Length3.15 Inches
Weight0.03 Pounds
Width0.87 Inches
Part NumberAGAMMIXS70B-1T-CS
ModelAGAMMIXS70B-1T-CS
Warranty5 year manufacturer limited warranty

7. Bicool

#ad

Etc., Bicool Mini Base Board A for Raspberry Pi Compute Module 4 Lite/eMMC Series Module,with Standard CM4 Socket and 40PIN GPIO Header Onboard Multiple Connectors CSI/DSI/FAN/HDMI/USB/RJ45

#ad
Bicool #ad - Please confirm the fan voltage before connecting. Compared with version b{mini base board b}, but a version price is more affordable. Connector:raspberry Pi 40PIN GPIO header. This model only support 5v fan and cannot work with the 12v fan.

The dsi display port is connecting the DSI0 interface of the CM4, and doesn't use the DSI1 display interface. The type c interface can be used for power supply or USB SLAVE interface for burning the image. Specifications: networking:gigabit ethernet rj45 connector, fan controller and battery holder, supports communication modules or NVME SSD. With standard cm4 socket and color-coded raspberry Pi 40 Pin GPIO header, suitable for Compute Module 4 Lite/EMMC series module.

Onboard multiple connectors including:csi/dsi/FAN/HDMI/USB/RJ45 Gigabit Ethernet/Micro SD Card Slot/M. 2 slot. Using screws of other lengths may cause the CM4 core to be damaged by the screws. Specifications: display :mipi dsi display port 15pin 1. 0mm fpc connector. Video:hdmi port × 2 including one port via FFC connector, supports 4K 30fps output. Usb:usb 2. 0 type a × 2, M.
BrandBicool #ad
ManufacturerBicool #ad
Part NumberBC-CM4 Base Board (A)

8. UCTRONICS

#ad

UCTRONICS for Raspberry Pi SSD Case, Supports 2 Units of 2.5” SSD and Raspberry Pi 4, 3B/3B+ and Other B Models

#ad
UCTRONICS #ad - Quality built: nice and sturdy gauge of carbon steel used in its creation, matte black powder coat finish, have nothing breaking off, paint chips, sharp exposed edges plate corners are rounded off smooth.

Note: the sata to usb adapters are not included, please search for ASIN B09CD94G5R to get the SATA adapter as you need. This nas bracket is specifically designed to get a bigger network attached storage for Raspberry Pi, compatible with 2. 5” ssd 7mm/9mm and rpi 4b/3b+/3b/2b, which is perfect for game or media servers, security monitoring system or other projects expanding the functions of Raspberry Pi.

Easy to setup: just insert your ssds and fix them with the screws, mount the RPi, and then sticker the rubber feet; The assembly manual is contained in the package. Applications: this is a hardware solution to get ingenious use of the Pi4, with this kit and open source software OpenMediaVault, you can expand the storage of your Pi with 2 2. 5" ssds and share files across a local area network LAN.
BrandUCTRONICS #ad
ManufacturerUCTRONICS #ad
Part NumberU6157