Top 8 Ceiling Speakers with Volume Control – Ceiling & In-Wall Speakers

As an Amazon Associate I earn from qualifying purchases.

1. Atlas Sound


Atlas Sound 8" 10W Ceiling Speaker

Atlas Sound #ad - Incorporate or remove volume control knob to suit application requirements. 10oz speaker provides familiar response & performance. Attractive crs white powder Coat baffle with center mounted volume control.
BrandAtlas Sound #ad
ManufacturerAtlas Sound #ad
Height8.2 Inches
Length2.9 Inches
Weight4.28 Pounds
Width8.2 Inches
Part NumberSD72WV

2. Speco


Speco Tech G86, TCG 8-Inch Speaker with 70/25V Transformer and Volume Control

Speco #ad - 8-inch dual cone woofer. Power handling: 10 watts peak. Wire and mounted transformer with 5, 2. 5, 1, 05 and 025 watt taps.
BrandSpeco #ad
Height4 Inches
Length15 Inches
Weight3.35 Pounds
Width14 Inches
Part NumberG86-TCG
Warranty30 DAYS

3. Pyle


Pyle KTHSP125 6 Room In-Ceiling Home Speaker System w/6 Volume Controls Knob & Selector

Pyle #ad - 6 channel high Power Stereo Speaker Selector. Qty 6 wall mount vertical Slide Volume Control Knob. Qty 12 in-ceiling 2-Way Speakers.
BrandPyle #ad
ManufacturerPyle #ad
Weight41.11 Pounds
Part NumberKTHSP125

4. Pyle


Pyle PVC1, 20-20kHz Freq. Response Companion for Hi-Fi Four-Pair Speaker Selector w/ Audio & Video Compatibility, Wall Mount Volume Control Knob, Flush In-Wall Plate Rotary Style Adjustment, White

Pyle #ad - 100w power handling: pyle flush in-wall volume control works with all audio and video systems up to 100w power. You can control speaker volume independently within various areas of your home, office or business applications. It includes mounting ring and other installation wire nuts.

Connector Type: Usb. 20hz – 20khz frequency response: pyle wall mount volume control your speakers to deliver a rich quality sound in the same room as your speakers. Rotary knob adjustment: a multi-position light-touch rotary knob style adjustment for whole house audio source volume systems. In-wall/wall plate: this whole-house volume control is a universal standard decorative flush in-wall or wall mount installation finishing plate for speaker and stereo system control.

Included components: 1 Pyle-Home Branded Product. A convenient audio source volume setting that allows you to control speaker volume independently in each audio zone. Four-pair speaker selector: add up to 4 pair of speakers throughout your house and control them all from this wall plate volume control. This in-wall volume control is designed for wide frequency response range reproducing high-fidelity sound. It maintains the full hi-fi audio frequency response with no low frequency roll-off.
BrandPyle #ad
ManufacturerSound Around #ad
Height3 Inches
Length3 Inches
Weight0.94 Pounds
Width3 Inches
Part NumberPVC1
WarrantyManufacturer Warranty

5. Moonrise


White, Monoprice 108243 RMS 100W Speaker Volume Controller

Moonrise #ad - Wireless communication technology: IR;. Please note: this volume control does not include a wall mounting bracket. The mvr-100 is a rotary-type wall plate volume control for speaker systems with power ratings of up-Inch 100 watts per channel and impedance ratings of 4-Inch 16 ohms. This rotary control can be set-Inch one of twelve positions including the minimum off and maximum volume settings.
BrandMoonrise #ad
ManufacturerMonoprice Inc. #ad
Height2.1 Inches
Length4.9 Inches
Weight1.05 Pounds
Width4 Inches
Part Number108243
WarrantyLimited Warranty

6. OSD Audio


OSD Audio 100W Impedance Matching in Wall Whole House Volume Control Rotary Knob White SVC100

OSD Audio #ad - Includes junction box and screws as well as white, ivory and almond trim plates to match any room decor. It accepts up to 14 gauge wiring and fits in a standard gang box with a 2. 9” depth. Volume control: the controls allow you to adjust the volume of a pair of speakers independently of other speakers in a house audio system.

Design: for dedicated audio zones, the décor plates install easily into a wall and work with almost any system. They are ideal for both softer and higher volume locations. Impedance protection: this feature of svc100 assists in stabilizing the ohm load going back to the amp or receiver with parallel connections to avoid overheating and damaging expensive equipment by matching the impedance.

High power: the svc100 is rated at 100 watts per channel with minimal bass roll-off. Knob: wire a 12-step linear rotary-style knob for a wide range of listening volumes. It includes front mounted adjustable jumpers to add up to eight pairs of 8 ohm speakers simultaneously.
BrandOSD Audio #ad
ManufacturerOSD Audio #ad
Height4.5 Inches
Length5 Inches
Width3 Inches
Part NumberSVC100
Warranty5 Year Limited Warranty

7. Pyle


Rotary Knob Fader Control Up to 2 Pair of Indoor or Outdoor Speakers, In Wall Speaker Volume Control, Pyle PVCD15, Home Audio Smart 2-Channel A/B Dual Channel Speakers Controller Selector Pod Box

Pyle #ad - To increase/decrease the remote speaker's volume turn the inwall volume control clockwise/counterclockwise. Turn on the amp and set its volume control slightly above the normal listening level. The included decora-style wall mount plate frame cover means this controller will unobtrusively blend into your wall and allows for a clean installation on your walls.

Easy to install: the pyle in-wall stereo volume control installs in a junction box, just like a light switch. It also features up to 120 watts load handling power. Fits standard electrical junction/gang boxes. Standard size: it features a universal standard wall plate size. Makes it simple and easy to direct your home amplifier audio to 2 sets of speakers.

Operation: set the amplifier's volume control to minimum. Rotary knob operation: the indoor outdoor speaker controller features a convenient and simple rotary knob controls which makes volume adjustments a breeze! Control up to 2 speakers with the two independent rotary faders. Universal compatibility: the 2 channel speaker volume fader is compatible w/ all audio and video systems making it a wise choice to add to your home theater system.
BrandPyle #ad
ManufacturerSound Around #ad
Height4.75 Inches
Length4 Inches
Weight404 Grams
Width3 Inches
Part NumberPVCD15
WarrantyOne Year Limited

8. OSD Audio


OSD 4 Zones Speaker Selector w/ Volume Control 300W Impedance Matching Dual Input On/Off SSVC4

OSD Audio #ad - Sound quality: the audio stays at a consistent quality with the SSVC4 to manage your speakers with volume controls to raise or lower the volume of each listening zone for perfect sound. Power: this speaker selector allows you to distribute an amplified signal for up to four zones throughout the house, letting you choose which source is playing in each designated zone.

Impedance protection: impedance-matching frequency protection circuitry allows one amplifier to safely power multiple pairs of speakers without your amp or receiver overheating or damaging the equipment.

There are screw down terminals to the cable to never become loose. Design: front mounted master a/b switches are dual source for each separate zone to conveniently input and switch from one music source to another with on and off buttons. Durable: the ssvc4 features a 16 gauge steel construction with durable black wrinkle powder coating and gray silk-screening.
BrandOSD Audio #ad
ManufacturerOSD Audio #ad
Height3.75 Inches
Length18.5 Inches
Weight6.5 Pounds
Width7.75 Inches
Part NumberSSVC4
Warranty5 Year Limited Warranty