Top 10 Zhiyun Crane Plus Accessories – Professional Video Stabilizers

As an Amazon Associate I earn from qualifying purchases.

1. Neewer

#ad

Neewer Carbon Fiber Dual Handle Grip, Diameter Adjustable 25-45mm Compatible with Zhiyun Crane 2/Crane V2/Crane Plus/Crane/Crane M/ Feiyu G6 Plus/A1000/A2000/MOZA Air Aircross Gimbals Only Grip

#ad
Neewer #ad - Multiple 1/4-inch screw holes: 1/4 inch screw threads holes on the grip enable you to connect field monitor, led light, Bluetooth remote or any other accessories to your cameras. Note:not support DJI Ronin-S.

Multi-choices of holding ways: provide various shooting ways including positive grip gesture and inverted grip gesture; Can realize shooting in different angles, and finish the shooting in most of circumstances. Adjustable holder socket design: suitable for gimbles diameter within 098-1. 77 inch/25-45 mm, feiyu g6 plus, crane m, crane plus, crane, compatible with zhiyun Crane 2, Crane V2, a2000, a1000, MOZA Air Aircross and other gimbles as long as its diameter is from 25-45mm.

You can hold it tightly without worrying about the falling off due to enduring application. Non-slip design: the 2 handles are made of rubber with anti-slip design to increase friction. Lightweight and durable: made of carbon fiber, lightweight yet solid and durable so to safely secure gears to the gimble grip and easy to hold.
BrandNeewer #ad
ManufacturerNeewer #ad
Weight1.75 Pounds
Part Number10093965
Model10093965

2. SMALLRIG

#ad

SMALLRIG Mounting Rod Clamp Ring for Zhiyun Crane2 Crane v2 Crane Plus Gimbal Stabilizer for DSLR Camera with 1/4" & 3/8" Thread Locating Points, 18 lb Payload- 2119

#ad
SMALLRIG #ad - High customizationthe rod clamp is specially designed only for zhiyun crane2 / Crane v2 / Crane Plus handheld gimbal stabilizer. Locating point for arrifeatures 3/8’’ locating holes for arri standard on the side allowing to be attached an Anti-Rotation Magic Arm 2026 to hold your monitor.

Mounting pointsthe extension ring is equipped with a lot of 1/4’’-20 threaded holes that allow you to attach more accessories, such as SmallRig magic arm 2070 and Cold Shoe 1960 Handheld setupit allows mounting a rod clamp and then two 15mm rods with Shoulder Pad 2077, as well as Handle 998 to hold your Zhiyun Crane 2/V2 on your shoulder.

This clamp can be attached to 4 positions on the Crane 2, and 1 position on the Crane V2 handle as shown in the picture. Please notemax load: 8. 5kg18lbs. It could support most of the camera, led, camera handle, microphone, and camera accessories such as a monitor, etc.
BrandSMALLRIG #ad
ManufacturerSMALLRIG #ad
Height0.47 Inches
Length3.31 Inches
Weight0.21 Pounds
Width2.62 Inches
Part Number2119-AU
Model4336305231

3. zhi yun

#ad

Zhiyun TransMount Quick Setup Kit 1/4" Thread Mount Well Compatible for Zhiyun Zhiyun Weebill S WEEBILL LAB Crane Plus Crane 2 Crane V2 Crane M with PERGEAR Cleaning Cloth

#ad
zhi yun #ad - Reliable quality〗High performance aluminum alloy materials make sure the quality. Universal 1/4 thread mount〗adopting 1/4" thread mount, it is not only an accessory exclusive to WEEBILL LAB.

Compact and portable〗Trans Mount Quick Setup Kit is highly portable. The kit allows you to switch between upright mode and underslung mode in a second. Note: with transmount quick Setup Kit: Only a few seconds, you can change yourholding gesture. Without transmount quick Setup Kit: Screwing the tripod/monopod ontothe stabilizer will take several minutes. Quick release and setup design〗quick setup kit originally created by zhiyun allows you to release and set up the tripod/monopod on the stabilizer quickly instead of screwing. It can be applied in monopod and monitor to realize quick setup.
Brandzhi yun #ad
Manufacturerzhiyun #ad
Part NumberZhiyun TransMount Quick Setup Kit

4. Agimbalgear

#ad

Zhiyun Weebill LAB, Microphones, LED Light etc Compatible with DJI Ronin-S, Plus, Ronin SC 2, Moza Air Mini Dual Grip, Crane 2, DH03 Handheld Gimbal Grip with Cold Shoe for Mounting Monitors

#ad
Agimbalgear #ad - Durable quality but lightweight. Double usage allowed - use it as a dual grip for your gimbal, you may order two pieces together and use as integrated grip with greater scalability for more professional photography & shooting: It would save a lot of weight from your arms expecially when comes with heavy camera.

Universal compatibility - handheld gimbal adapter bracket comes with 4 x double sided 1/4'' and 3/8'' threaded hole, can add microphone, RS 2 ZHIYUN Weebill LAB, monitor, rsc 2, standard Adapter Top Cold Shoe mount, LED video light all OK. Compatible with dji ronin s, ronin sc, crane 2/Crane plus/Crane V2/Feiyu AK4000 Ak2000 mobile Gimbal.

Enables you to shoot at wider or lower angles at ease. Works perfect as stabilizer dji ronin s accessories. Quality material - Lightweight Aerospace Aluminum Alloy. More monting options - copper colored stainless steel locking nut also offers 1/4" screw thread configuration for continued extension tripod / rod / pole use. Unibody l shape bracket - handle grip is designed with increased strength.
BrandAgimbalgear #ad
ManufacturerAgimbalgear #ad
Part NumberDH03
ModelDH03

5. SMALLRIG

#ad

SMALLRIG Adjustable Camera Monitor Mount for DJI Ronin-S/Ronin-SC & ZHIYUN Crane 2S/Crane 3/3S/WEEBILL-S & MOZA AirCross 2 Gimbals, 2889

#ad
SMALLRIG #ad - High customizationsmallrig adjustable monitor mount 2889 can hold your monitor or accessory onto the handheld stabilizers. The monitor mount features three 1/4"-20 threads for additional accessories such as SmallRig Cold Shoe 1241 for microphone or sound receiver.

360° tilt rangethe monitor bracket features 360° tilt and can hold a monitor rig up to 2. 2 lb. Note: please use the hex spanner to re-tighten the thumbscrew to ensure safe. Firm lockingthe robust mount features a rubber pad to protect your monitor from scratching. The mount is compatible with dji ronin-s/ronin-sc & zhiyun crane 2s/CRANE 3/3S/WEEBILL-S & MOZA AirCross 2 Gimbals. Rosette mounting plate for ronin-s/scthe mount attaches to the mounting threads for zhiyun crane 3, WEEBILL-S, or weebill lab with a built-in thumbscrew, CRANE 3S, and a rosette adapter plate is included to attach the mount to the DJI Ronin-S or Ronin-SC with two included M4 screws.

Each thumbscrew features slots for Allen wrench to tighten the mounting screws. Also fits moza aircross 2for moza aircross2, please do attach the Mounting Plate 2826 first before attaching the monitor mount. Please note that it can only support monitor up to 1kg.
BrandSMALLRIG #ad
ManufacturerSMALLRIG #ad
Height1.73 Inches
Length5.28 Inches
Weight0.19 Pounds
Width1.3 Inches
Part Number2889-TY

6. EACHSHOT

#ad

Allow Smartphone to be Used on DJI Ronin SC, Crane Plus, Phone Holder Clip Connector Head Used for Monopod, Zhiyun Crane M3,M2S, M2, Feiyu Ak2000, Weebill S, EACHSHOT Cell Phone Tripod Mount Adapter

#ad
EACHSHOT #ad - Made from durable plastic and soft protective rubber, this adapter tightly grips and holds your device without damage. Compact, Lightweight, and Portable.

Compatible with  iphone 13 pro max 12 pr 12 11 x, xs, 8, 6, 3, s9+, 6+, 5, 5s, and 5c, 4, s6 edge, s8, s7, 5, 7+, se, xr, xs Max, S6, s8+, or samsung galaxy s21 ultra s20 s9, and note 9, 7, 6s, 8, and more. Allow your smartphone to be used on gimbal like dji roin SE, Crane M2, Weebill S, Zhiyun Crane M3, Crane Plus or Feiyu Ak2000C. This adapter can be mounted on most tripods, selfie sticks, monopods, or other filming devices that have a 1/4"-20 mount.
BrandEACHSHOT #ad
ManufacturerEACHSHOT #ad
Height0.98 Inches
Length2.95 Inches
Width1.38 Inches
Part NumberEA702421

7. zhi yun

#ad

Zhiyun Crane 2S 3-Axis Handheld Gimbal Stabilizer for DSLR Camera Mirrorless Cameras Professional Video Stabilizer Compatible with Sony Nikon Canon Panasonic LUMIX BMPCC 6K Crane2S New zhi yun Crane 2

#ad
zhi yun #ad - Powerful but lightweightthe handle of it is built with carbon fiber, lightening the physical burden of videographers without compromising the loading capacity of the gimbal. Transmount ecosystemthe transmount ecosystem of accessories is here to better serve videographers with TransMount image transmission system, quick setup kits, servo zoom/focus motors, monopod, etc.

With it, you will be able to go through the entire menu within seconds and switch between different modes. Buttery smooth movementsix gimbal modes, are all easily accessible on CRANE 2S: Pan Following, Following, Locking, from basic to advanced, Vortex, Full-Range POV, Go mode.

Bigger screen the new 096" oled screen offers a bigger vision. Crafted for perfectioncrane 2s is highly optimized in motor control algorithms and motor power, and it can handle large cameras such as the BMPCC 6K, EOS 1DX Mark III, Panasonic S1H, etc.
Brandzhi yun #ad
ManufacturerZhiyun #ad
Height4.21 Inches
Length14.02 Inches
Weight6.83 Pounds
Width12.4 Inches
Part NumberZY0084
ModelZY0084

8. zhi yun

#ad

Zhiyun TransMount Phone Holder with Crown Gear for Crane 2S Weebill S Weebill Crane 3 Lab 3S 3S Pro Smartphone Clamp with Rosette Gimbal Stabilizer

#ad
zhi yun #ad - Compatible with Zhiyun Crane 3 LAB. Compatible with zhiyun WEEBILL LAB. Compatible with Zhiyun Crane 2S. Compatible with Zhiyun Crane 3S / Pro. Compatible with Zhiyun WEEBILL S.
Brandzhi yun #ad
ManufacturerZhiyun #ad
Weight0.02 Pounds
Part NumberZY0015
ModelNA

9. LingoFoto

#ad

A6300 40CM Straight, A77M2, for Zhiyun Crane 2 for Weebill S Control and Charger Cable, A6000, A9, A7S2, A77, Micro USB to Multi Camera Control Cable for Sony A7S

#ad
LingoFoto #ad - Materialit is made of high quality material PVC which means it used for long time and it is much safe. Lengththis cable total length is 40cm.

At the same time, you can use this cable for charging. Compatiblestraight control cable is suitable for zhiyun crane, a7s2, a6000, Crane-Plus, Crane-m, for weebill s stabilizer; Suitable for Sony camera: for Sony A7S, A9, A77M2, A77, Crane2, A6300. Support shutter, video and zoom function. Control and chargethis cable is used to connect your camera and stabilizer which can avoid shaking in order to record the moving moment. Package included1* camera Control Cable for Sony Micro USB- Multi.
BrandLingoFoto #ad
ManufacturerLINGO #ad
Height0.79 Inches
Length7.87 Inches
Width5.91 Inches
Part NumberAC1015j

10. zhi yun

#ad

Handgrip Quickly for Zhiyun Weebill S Crane 2 Crane Plus Gimbal Stabilizer, Attach and Detach Release Tripod, 2 Pack Zhiyun TransMount Quick Setup Kit

#ad
zhi yun #ad - The kit allows you to switch between upright mode and underslung mode in a second. However, weebill lab, not for Zhiyun Crane 3 LAB. Compatible with zhiyun weebill s, crane 2. Come with 2 pack of Zhiyun quick setup kit. It consists of two pieces, one piece with 1/4 screw thread and the other with 1/4 hole. Allows you to release and set up the tripod/monopod on the stabilizer quickly instead of screwing.
Brandzhi yun #ad
ManufacturerZhiyun #ad
Part NumberZY0089