Top 10 Mobile Phone Holder for Car – Computers Features

As an Amazon Associate I earn from qualifying purchases.

1. VICSEED

#ad

Thick Case & Big Phones Friendly Long Arm Suction Cup Phone Holder for Car Dashboard Windshield Air Vent Hands Free Clip Cell Phone Holder Compatible with All Mobile Phones, VICSEED Car Phone Mount

#ad
VICSEED #ad - Position your phone at the perfect angle to enjoy a more relaxed and safer drive. It easily sticks securely on the dashboard or most flat surfaces. This car holder for cell phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. One-hand operation: the car mobile phone holder also features a One-button release system that enables you to lock or release your phone with just one hand operation.

Fit well for all mobile phones between 4''-7''in width and most thick case. Note: use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry. Good choice to most of the cars, taxis; good assistant for Uber, pickup trucks, trucks, Lyft drivers. Long arm design & multiple viewing angle: the car mount for iphone 11 has a telescopic arm that extends from 4.

84" - 9. 05" and can pivot up or down for a variety of angles which optimizes viewing capabilities. Secure stable install: the vicseed car cell phone mount features an extra strong suction cup with super sticky gel pad. Perfect protection: say goodbye to the easy-scratched plastic panel car mount. 3 in 1 universal car mount: vicseed car cell phone holder made with airliner ptfe material, can be universally mounted to your dashboard, SUV, windshield or vent to meet your demand at your convenience and requirements.
BrandVICSEED #ad
ManufacturerVICSEED #ad
Height1.18 Inches
Length3.94 Inches
Weight0.73 Pounds
Width3.15 Inches
Part NumberSB-304
ModelBS-BIRD9384
Warranty30 Days

2. iOttie

#ad

Huawei, iOttie Easy One Touch 5 Dashboard & Windshield Universal Car Mount Phone Holder Desk Stand for iPhone, Moto, LG, Samsung, Smartphones, Nokia

#ad
iOttie #ad - Telescopic arm: the improved telescopic arm now extends from 5 inches to 8 inches as opposed to the Easy One Touch 4 which only extended to 6. 5inch and pivots 260 degrees. The mount’s arms will close automatically, holding your device securely while you drive.

Magnetic cord organizer: Keep charging cables neatly organized with the magnetic tab located near the bottom foot. Mount or remove your phone in seconds with the patented Easy One Touch Mechanism. Easy one touch mechanism: press the locking side arms with a quick one-handed motion, and place your phone against the trigger button.

Adjustable bottom foot: You can easily and securely adjust the bottom foot by squeezing the spring button. Wide compatibility: new larger Easy One Touch button, with a universal cradle that fits smartphones and cases of any size. This enables a myriad of customized viewing angles while you’re on the road.
BrandiOttie #ad
ManufactureriOttie #ad
Height4 Inches
Length6.5 Inches
Weight0.45 Pounds
Width4.2 Inches
Part NumberHLCRIO171AM
ModelOne Touch 5
Warranty2 year manufacturer

3. Qifutan

#ad

Cell Phone Holder for Car Phone Mount Long Arm Dashboard Windshield Car Phone Holder Strong Suction Anti-Shake Stabilizer Phone Car Holder Compatible with All Phone Android Smartphone

#ad
Qifutan #ad - Smooth contact: the car phone mount is padded with multiple soft silicone pads to avoid scratching your smartphone or other devices. Perfect choice for most cars, taxis; a good assistant for Uber, vehicle, pickup trucks, trucks, SUVs, Lyft drivers. Make your operation more fluently.

Note: the car mount need a big enough flat surface to make the adhesive attached closely and completeLY. Ideal viewing angle: the car phone mount features a 360° rotating ball joint that allows you to switch it from portrait to landscape view quickly, for getting the best viewing angle. Note: only use the extra dashboard pad when the suction cup can not attach on the surface closeLY. Broad vision: qifutan cell phone car mount features a 16cm/6. 2in aluminum long gooseneck that sends your phone much closer to you.

It is favorable for navigation and sending and receiving phone calls. One-hand operation: press the button on the lower back of the car mobile phone holder to take out your phone, and press the back edge of the clamping arms to secure your phone with one hand. Most importantly, you can bend it in every direction to avoid obstructing the view. It can be mounted on the windshield firmly. Note: use warm water to wash the car holder's suction cup if the surface is dirty or it can not stick firmly, then let it air dry.
BrandQifutan #ad
ManufacturerQifutan #ad
Part NumberHD-C77
ModelHD-C77

4. VICSEED

#ad

VICSEED Car Phone Holder Mount, Upgrade Doesn't Slip & Drop Air Vent Cell Phone Holder for Car Hands Free Easy Clamp Cradle in Vehicle Compatible with All iPhone 13 Pro Max Mini Android Smartphones

#ad
VICSEED #ad - Perfect protection: say goodbye to the easy-scratched plastic panel phone mount. No need worry your phone will fall off from the samsung universal car mount. The car phone mount attaches easily and securely to most of air vent. The unprecedented design makes leaves zero scratches on mobile devices.

Secure grip & one-button release: this car cell phone holder owns the thick arms built-in anti-slip rubber pads, which makes the iphone car mount can secure grip your mobile phone. Secure stable install: the vicseed phone car holder with the latest improved vent clip won't broken & Drop off. The car mount for phone is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. The hands free cell phone holder for cars also features a One-button release system that enables you only take 01s to lock or release your phone with one hand operation.

Vicseed cell phone holder for car adds a upgrade high-density silicone material with excellent resilience. Easy to adjust & multiple viewing angle: this car mount for phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. It ensures a safe, distraction-free car environment. After take few seconds to install it well, if you hit a bump or a sharper turn the car phone holder will stay in a place.
BrandVICSEED #ad
ManufacturerVICSEED #ad
Height3 Inches
Length4.9 Inches
Width2.5 Inches
Warranty30 days

5. Miracase

#ad

Air Vent Cell Phone Holder for Car, Universal Car Phone Holder Cradle Compatible with iPhone 13 Series/iPhone 12 Series/11 /11 Pro Max/XR/Samsung and More, Upgraded Miracase Car Phone Mount

#ad
Miracase #ad - Provide you with safer driving whether you are talking, navigating, listening to music or charging. Also compatible with samsung galaxy note20 ultra/note20/note 10 / note 10+ /S21 Ultra/S21/S10/S10+/S9/S8/S8+/S7/S7 Edge/LG Google etc. Universal compatibilitymiracase car cell phone holder has an adjustable mount which makes it widely compatible with smartphones or electronic devices from 4.

0 to 7. 0 incheswidth size from 2. 1-4. 05 inch, compatible with iphone 13/13 pro/13 pro max/13 mini/12/ 12 pro/ 12 pro max/12 mini/11 pro Max/11 Pro/11/XS MAX/XS/XR/X/8/8 Plus/7/7 Plus/6s/6 Plus. This car phone holder has stable trapezoid-structure clamps with thickened shockproof sponge and rubber, which could hold the phone steadier than others. The spring-clip plate and the tightening nut will provide absolute fixation. Just enjoy the best driving experience. Professional supportplease feel free to contact us in the first time for any product issues, a satisfied solution is promised forever.

Latest design-never fall offmiracase car phone mount adopts latest fall-proof locking design which holds your phone securely to the vent. It will never fall out like other products no matter how bumpy. 360 degree adjustable view anglethe 360-degree rotatable head will provide you with the best viewing angle, so you could see the phone screen clearly and keep secure driving rather than limited by view angle or unwieldy phone holder for car.
BrandMiracase #ad
ManufacturerMiracase #ad
Height4.33 Inches
Length4.72 Inches
Weight0.28 pounds
Width4.33 Inches
Part Number13232
ModelClassic Vent Phone Holder-CA19

6. AINOPE

#ad

AINOPE Car Phone Holder Mount, 2022 Upgraded Gravity Phone Mount for Car Vent with Newest Hook Clip Auto Lock Hands Free Cell Phone Holder Car Mount Compatible with iPhone 13 Pro Max & All Phones

#ad
AINOPE #ad - Note:maximum thickness of device is 14mM 05in. Note:we recommend using the smaller phone<4. 7inch with phone CASE. Upgraded air vent hook: this car vent phone holder mount is designed as "hook shape" and form "three grasp points" which can firmly hook around the a/c vent for no slippage or movement. You can have a wider sight and adjust this gravity car phone holder up/down or left/right.

The easiest operation & just slide in and go: just slide in your phone, car phone holder mount clamps the phone automatically by gravity and provide the easiest operation and a strong stable hold without button to press. Compaired to old car holder, you no longer free hands to spend too much time in looking down to place phone while reseting the navigation route. Auto lock, no more fall :this gravity slide-in car phone holder creatively features the auto-lock arm-slots that stretch on the side can auto adjust to hold phone more firmly without fears of bumps, Special curve of arms fit phone better.

This phone holder only compatible with horitable air vent. Universal compatibility: this universal car cell phone holder will firmly hold all the smart phones 4-7in even with thicker case ≤14mm compatible with iphone 13 12 pro max/ 11 pro max/XR/X/8/7/6/5, Note 20 10/ Galaxy S10+/ S9/ S8 /S7 /S6 and more. Note: the horizontal mode is not supporTED. It solving the market's common problem of falling forward and off the air vent constantly when going over bumps or turns. Note: the length of clamp betweeN 0
BrandAINOPE #ad
ManufacturerAINOPE #ad
Height1.3 Inches
Length3.92 Inches
Width4.49 Inches
Part NumberAV640
ModelAV640-BLACK

7. TORRAS

#ad

Universal Car Phone Holder Mount Dashboard Windshield Vent Compatible with iPhone 13 12 11 Pro Max XS X XR, Samsung Galaxy S20+Ultra S10 Note 10 Plus, TORRAS Ultra-Durable Cell Phone Holder for Car

#ad
TORRAS #ad - Note: the sticky pad just can be used once, 1 sticky pad, 1 strong air vent clip, please think twice to stick it. It fits perfectly for your car no matter what the thicker blades vents or vertical ones. With the car holder for cell phone, you can get a package including 1 enhanced suction cup, and 1 user manual. What you get: torras ensures you with an 36-month pleasant experience and top customer service.

4 in 1 ultimate car mount: are you not sure which installation method is better for your car? No worries! The 4 in1 phone mount for car can be flexible placement! Dashboard & Air Vent & Windshield & Home, with low temperatures in winter and heat in summer, all places work perfectly! Also, you can choose to avoid the issue caused by environmental influences. Also, you can get a sticky pad to protect your car dash. Completely friendly, hands-free and views-adjustable!2022 enhanced vent clip: you can screw the nut to fix the clamp freely, the tighter you screw, the sturdier it will be! its two small arms are just enough to press against the upper and lower vent blades to form a stable triangular structure and lighten the load on the middle one, with no damage to your car.

Like iphone se /11/ 11 pro/11 pro max /x/ xs max/xr/8 plus/8/7/6s plus, LG v20, Google Pixel 3a/4 XL, One Plus and more. Please feel free to let us know if have any questions about this car phone mount. Easy&real hands-free: release easily with one button, samsung galaxy s21 /s20/s20+/s20 ultra 5g/note 20/10 plus/10/9 plus/9/s10/s9/a10e, clamp fast with one hand! ▶the car phone holder mount is suitable for all kinds of mobile phones with brand thick cases, Battery cases, Ring cases and it is exceptionally sturdy to hold your phone tightly.
BrandTORRAS #ad
ManufacturerTORRAS #ad
Height3.94 Inches
Length5.12 Inches
Weight0.5 Pounds
Width2.36 Inches
Part NumberCTVK06-JP
ModelCHANG 4in1
Warranty36 Months

8. VANMASS

#ad

Universal Handsfree Windshield Dash Air Vent Cell Phone Holder Car, Compatible with iPhone 13 12 Samsung LG & Truck, Upgraded VANMASS Car Phone Mount Super Suction Cup Dashboard Phone Holder Stand

#ad
VANMASS #ad - Freedom² is dancing = 2 x 360°+065”+270°2 replaceable accessories1 suction cup + 1 vent clip; 360° swivel ball head; 065‘’ adjustable bottom tray; 270° rotatable telescopic arm. Born with love & blessingthe 2022 version took six years to analyze the top 100 products, optimize 121 models, 000+ users, 500, listen to the voice of 6, test 168 kinds of material.

Flexible for 99% vehicles & phones as you please. We are proud to receive the world-leading CP65/ REACH/ ROHS safe certifications. Holder king: guard you safe drivingthe original silicone clamps grip the mobile phone like your hand, ensuring that your device will stay firmly in position, even on bumpy roads, sharp turns, or emergency brakings. Please use the mount on the windshield or air vent instead.

Package includes phone mount *1, suction cup *1, air vent clip *1, dashboard pad *1 Tips: The LEATHER dashboard is NOT suitable for ALL suction cups. Patented multi-scene design: car & kitchen & desk & bathroom & gymcomes with a patented sucker & steel-cored vent clip, movie, excels in music, GPS navigation, video call, be a perfect assistant for your life. Luxury present: top-notch configuration & master-designed packageexquisite car phone mount is fully protected in the elegant & eco-friendly box.
BrandVANMASS #ad
ManufacturerVANMASS #ad
Weight0.57 Pounds
Part NumberVMEZ11CTBK1A-US-haoyijia
ModelCTEZ11
Warranty36 months warranty

9. TORRAS

#ad

TORRAS Cell Phone Holder for Car Thick Case & Heavy Phone Friendly 3 in 1 Car Phone Holder Mount Dashboard Air Vent Windshield Compatible with iPhone 13 12 11 Pro Max Samsung Galaxy Note S21 Ultra

#ad
TORRAS #ad - Strong muscular arms based on a year-long test, we found the most suitable wrapping angle for the car mount. Military grade pp material say goodbye to the easy-scratched plastic panel car mount. Adopt top quality PC and bite structure, passed the latest 17 shaping process. Skidproof! scratch-proof! torras never ignores every detail, we use the latest vacuum nanotechnology, which can adjust the shape of the silicone according to the size of the phone, even the small silicone pads, which have been rigorously tested.

Stick - sticker - stickiest this universal cell phone car mount uses Torras's third-generation suction cup, with three layers of super glue, which makes the mount sticks firmly to your car dashboard or windshield. It hugs the "child" tightly like a father's thick arm. The designed arm is more wrapping than the normal mounts. Even on the off road, taxis; good assistant for Uber, it won't stop working; Great choice to most of the cars, trucks, Lyft drivers. High quality and perfect appearance! it's not only a car holder in your car, it will make the car phone mount tightly locked on the dashboard; With the extra sticky pad, hug your phone tightly, as solid as a rock, but also a great decoration! Super secure car phone holder unique streamlined inward shrinking clamp, it helps create a smooth surface when the dashboard is not flat; Triangle air vent clip, never fall off; Press the lock mechanism of the suction cup, you can rotate the wrench to tighten it according to the thickness of the vent; The supporting pieces will lock it from fall down.3

3 in 1 multi-function with the latest powerful suction cup and air vent clip, suv, this car phone mount could be installed on car dashboard, pickup trucks, windshield or air vent securely. For most of the silicone pads on the market, ensuring that there is no gap between the phone car holder and the phone! So you needn’t to worry about your phone suddenly falling off during the journey!
BrandTORRAS #ad
ManufacturerTORRAS #ad
Height2.61 Inches
Length6.07 Inches
Weight0.45 Pounds
Width4.53 Inches
Part NumberTS-3-PH2IN1-US-BK
ModelCTVK40
Warranty36-month hassle-free customer service and lifetime support

10. BIMIGET

#ad

Cell Phone Holder for Car, CD Slot Car Phone Mount, One Button Release Easy Installation CD Player Car Phone Holder Mount Compatible with iPhone13 12 Mini 11 Pro XR XS MAX Galaxy S20 S20+ S10 S9 S8

#ad
BIMIGET #ad - The foldable holding feet allow hassle-free charging on the go. The sponge-padded surface and grips of the cradle prevent slipping and scratches. The foldable extra-wide supports never block the charging port, headphone input, and mic. Never slip & fallthere are sponge pads on the surface, which will dampen vibration from road shock, side arms and bottom feet of your CD slot cell phone holder, and protect your device from falling and scratching against the mount.

The cushioned car phone mount holds your phone in place regardless of road conditions. Play a good role in the car, enjoy hands-free driving. Wide compatibilitythe adjustable arms work with most phones between 4. 0'' and 6. 8'', including apply to iphone 13/12/11 pro max/11 pro/11/xs/xs max/xr/x/8 plus/8/7 plus/7/6s plus/6s/6 plus/6; galaxy s20/s20+/note 10+/note 10/s10/s10+/Note 9/S9+/S9/Note 8/Note 5/S8+/S8/S7/S7 Edge/S6+/S6; Google Pixel/Nexus; LG; One Plus; Moto and more phones even wearing protective case.

One-handed operationthe cd player car phone mount only needs seconds to install in your car. 100% protectionthe polished surface makes the mount look sleek in your car. It will never block the sight of driving, and it is convenient to use the mobile phone to navigate. The one-touch mechanism enables you to mount your phone effortlessly when you get in the car or remove it in one second when are ready to go exit your car. Adjustable as you wishyou can adjust the angle of habit and comfort, through the rotatable ball head 360 degrees to adjust the angle.
BrandBIMIGET #ad
ManufacturerVSSMSSA #ad