Top 10 Hot Shoe Mount Adapter to 1/4 – Camera Flash Shoe Mounts

As an Amazon Associate I earn from qualifying purchases.

1. Anwenk

#ad

Flash Hot Shoe Mount Adapter to 1/4 Thread Hole with 1/4"-20 Male to 1/4"-20 Male Tripod Screw Adapter for Flash Holder Bracket Light Stands Umbrella Holder Flash Bracket,Strong and Solid Update

#ad
Anwenk #ad - 100% money Back. Note: camera, flash, umbrella holder and tripod are not included. Flash hot shoe to 1/4" thread updated solid metal connection Base, Support Canon Nikon Pentax Olympus Metz Sigma Nissin Speedlite.

Note: may not Work for Sony Flash. 1/4" brass nut in the bottom, work for light stands/ flash holders with 1/4" screw head. Designed with cold foot, standard hot shoe support most flash, applicable to Canon Nikon Pentax Olympus Metz Sigma Nissin Flashes. Package includes 1x flash hot shoe mount adapter updated;1x 1/4"-1/4" screw. Comes with 1/4"-1/4" male to male screw for your varied configuration.
BrandAnwenk #ad
ManufacturerAnwenk #ad
Part NumberShoe Mount Adapter
ModelShoe Mount Adapter

2. ChromLives

#ad

Camera Mount Screw,ChromLives 1/4 to 3/8 Tripod Screw Adapter,1/4 to 1/4 Screw,3/8-20 Converter Thread Screw Adapter,Camera Hot Shoe Mount Adapter to 1/4 for Camera Monopod,Ballhead Flash Light,22Pack

#ad
ChromLives #ad - Widely application: these 1/4 inch camera screw adapters can be mounted on a wide range of different photography. Suitable for most dslr camera, tripod, ballhead, flash light stand, monopod, shoulder rig camera accessories and more.

Combo pack: 22 pcs camera screw adapter - 5x 1/4" to 3/8" reducer bushing screws; 5x 1/4" male to 3/8" male Screws; 5X 1/4" Male to 1/4" Male Screws; 5X Camera Spigot Screws; 2X 1/4" Hot Shoe Mount. Material : these 1/4"-20 tripod screw adapter camera mount are made of aluminium metal. It permits any devices with standard 1/4" screw hole to be installed on a flash hot shoe slot. Precision made: these camera screw adapters are all with international standard screw type 1/4"-20 and 3/8" male and female thread.

Solid and durable. The converter mount screws meet the most of your camera devices and other accessories and save your time for searching! Hot shoe adapter: made of anodized aluminum metal, the bottom of hot shoe connects to the dslr/slr camera hot shoe, the top part of it is a standard 1/4-20 tripod threaded spud.
BrandChromLives #ad
ManufacturerChromLives #ad
Part Number1369

3. Fotasy

#ad

Flash Shoe to 1/4"-20 Male Post Adapter with Locking Disk, Camera Hot Shoe Mount Adapter, 2 Packs Fotasy Hot Shoe to 1/4 Adapter

#ad
Fotasy #ad - Compatible with female 1/4"-20 threads mounts any item With a female 1/4"-20 Thread to the camera hot shoe. Package 2 hot shoe mount adapters. This adapter attaches to your camera's hot shoe converting it into a 1/4"-20 male post. For added security The knurled locking ring assures a tight connection to the accessory. Lightweight durable aluminum construction.
BrandFotasy #ad
ManufacturerPhotography Accessories INC #ad
Height3 Inches
Length3 Inches
Weight0.1 Pounds
Width1 Inches
Part NumberSCX2
ModelSCX2
Warrantyno

4. Anwenk

#ad

Camera Hot Shoe Mount to 1/4"-20 Tripod Screw Adapter Flash Shoe Mount for DSLR Camera Rig Pack of 2

#ad
Anwenk #ad - Material : aluminum alloy. Looking for 1/4"-20 camera screw adapters as well? Search"B018SMYL9M" to find camera screw adapters. Easily attach dslr accessories to camera hot shoe mount or cold shoe mount. Flash hot shoe mount with 1/4"-20 tripod screw adapter. To mount your microphone, camcorder or digital camera, LED light, monitor to dslR, or adapt anything else that has a 1/4-20 receptacle. Easy to use.
BrandAnwenk #ad
ManufacturerAnwenk #ad
Height0.3 Inches
Length5.2 Inches
Weight0.09 Pounds
Width4.6 Inches
Part Number1/4hoeshoe-2
ModelSL-1/4hotshoe-2
WarrantyNo

5. Atmoshue

#ad

2 Packs- Atmoshue 1/4" Female Thread to Hot Shoe Adapter, Video Light, Hot Shoe Mount Adapter with 1/4 to 1/4" Male Screw Adapter for Magic Arm, Monitor

#ad
Atmoshue #ad - Hot shoe adapter: this hot shoe adapter features a standard 1/4"-20 female threaded on the top, design for magic arms or accessories with 1/4"-20 male thread stud. All metal construction: made of whole aluminum alloy with black anodized by precise CNC machined, durability and stability.

Weight: 21g per. No rubber or Plastic Parts. With a 1/4 to 1/4 male screw converter: you could mount microphone, Led flash, monitor by this 1/4 to 1/4 male screw. Equipped with Tripod Adapter, travel tripod or cold shoe mount. Multi-mounting methods to choose. Install easily: superb craftsmanship, easily attach dslr accessories to camera hot shoe mount, led light, easy to mount and screw. Hot shoe mount base: with a standard 1/4 thread hole with hot shoe adapter base, allows you attach to camera, handle, cage, all cold shoe mounting devices as well as mount to tripod, grip and other camera support.
BrandAtmoshue #ad
ManufacturerAtmoshue #ad
Height0.59 Inches
Length1.18 Inches
Weight0.09 Pounds
Width1.18 Inches
Part NumberA-1505
Model1503-2P

6. Neewer

#ad

Neewer Two2 Pack of Durable Pro 1/4" Mount Adapter for Tripod Screw to Flash Hot Shoe

#ad
Neewer #ad - It can install yongnuo ctr-301p flash remote Trigger to Flash Shoe Umbrella Holder Stand Bracket. It can install nikon sc-28 flash sync cord to vh2000 camera flash bracket grip. This adapter permits the devices with standard 1/4" screw hole to be installed on flash hot shoe slot. 2 pack of 1/4" tripod screw to flash shoe mount adapter. Material: anodized aluminum metal. It includes 2 nuts which can be adjusted. This adapter can pile up two camera.
BrandNeewer #ad
ManufacturerNeewer #ad
Height2.36 Inches
Length7.09 Inches
Weight0.08 Pounds
Width4.72 Inches
Part Number90082479@@##1
Model90082479@@##1

7. MAEXUS

#ad

MAEXUS Hot Shoe Mount Adapter 1/4" Thread Mini Ball Head Ring Light Adapter for Cameras Camcorders Smartphone Microphone Gopro Canon LED Video Light Video Monitor Tripod Monopod 2 Pcs

#ad
MAEXUS #ad - Integrity warranty- package includes: 2 x ball head mount. The tightening wheel has threads cut in opposing directions, so once you tighten the control, the ballhead will be locked without shaking and it won't move around. We are committed to providing each customer with the highest standard of customer service.

1/ 4" screw mount- use to mount accessories onto a flash bracket, tripod, LED video light, and fits for most DSLR camera, camcorder, flash light, LCD monitors and other accessories with 1/ 4" screw thread. Standard hot shoe adapter- the product has a standard 1/ 4" hot shoe adapter 072" * 072", it will fit most dslr cameras such as DSLR cameras Canon, Panasonic, olympus, Pentax, Nikon, Fujifilm & Kodak.

Sturdy and durable- max load: 3. 5 lbs. It is lightweight but made of sturdy Aluminum Alloy and precise CNC process anodized aluminum materials, sturdy and durable, it won't be easy to suffer corrosion or breakage. If there is any doubt, please contact. Flexible positioning- when you twist the locking knob control, it can go to the exact position according to your needs by 360 degree rotation.
BrandMAEXUS #ad
ManufacturerMAEXUS #ad
Height0.71 Inches
Length2.44 Inches
Weight0.29 Pounds
Width0.71 Inches
Part NumberRXYT-2
ModelEA0394BK

8. Anwenk

#ad

2Pack Flash Hot Shoe Mount Adapter to 1/4 Thread Hole with 1/4"-20 Male to 1/4"-20 Male Tripod Screw Adapter for Flash Holder Bracket Light Stands Umbrella Holder Flash Bracket,Strong &Solid Update

#ad
Anwenk #ad - Flash hot shoe to 1/4" thread updated solid metal connection Base, Support Canon Nikon Pentax Olympus Metz Sigma Nissin Speedlite.

Note: may not Work for Sony Flash. 100% money Back. Note: camera, flash, umbrella holder and tripod are not included. 1/4" brass nut in the bottom, work for light stands/ flash holders with 1/4" screw head. Comes with 1/4"-1/4" male to male screw for your varied configuration. Package includes 2x flash hot shoe mount adapter updated;2x 1/4"-1/4" screw. Designed with cold foot, standard hot shoe support most flash, applicable to Canon Nikon Pentax Olympus Metz Sigma Nissin Flashes.
BrandAnwenk #ad
ManufacturerAnwenk #ad
Part NumberShoe Mount Adapter 2Pack

9. Neewer

#ad

1/4” to 1/4” Male Tripod Screw Adapter for Light Stand Umbrella Flash Holder Bracket, NEEWER 2PCS Flash Hot Shoe Mount Adapter to 1/4” Thread Hole Compatible with Canon Nikon Pentax Flash

#ad
Neewer #ad - Note: the adapter can’t work with Sony Flash. Get 2 in one purchasethe package includes 2 x flash hot shoe mount adapters and 2 x 1/4" to 1/4" male screws. Easy flash mountlooking for a place to hold your speedlite flash other than sitting on a camera, light stand, but its mount can’t fit? Use this flash hot shoe mount adapter to connect your flash to a tripod, umbrella holder, or flash bracket with 1/4” screw.

1/4" to 1/4" male screw includedthe adapter comes with a 1/4” to 1/4" male screw for easy connection with different devices. Universal flash mount adapter the mount adapter converts a speedlite flash hot shoe to a 1/4” threaded hole. It features a standard cold shoe mount compatible with Canon Nikon Pentax Olympus Metz Sigma Nissin Speedlite Flash. Strong metal mountthe adapter cold shoe mount is strongly built by solid metal, securely holding your speedlight flash.
BrandNeewer #ad
ManufacturerNEEWER #ad
Height0.87 Inches
Length1.26 Inches
Weight0.09 Pounds
Width0.94 Inches
Part Number10101025
Model10101025

10. Neewer

#ad

NEEWER 8-Piece 1/4” Cold Shoe Mount and Hot Shoe Flash Stand Adapter Set for DSLR Camera Rig, Camera Hot Shoe Mount Adapter, Flash Speedlight Shoe Mounts for Tripod

#ad
Neewer #ad - Wide compatibility this 8-piece set comes with four 1/4” male–cold shoe adapters for DSLR & mirrorless cameras, microphones, monitors, compact LED lights, and four cold shoe stand mounts with 1/4” female thread for most Speedlites and light stands.

No tools are required. Package contents 4 × cold shoe mount Adapter, 4 × Cold Shoe Flash Stand Adapter. Adjustable bracket cold shoe stand mounts can open to 20mm with the help of the locking knob and fasten a Speedlite with extraordinary clamping strength. Solid construction made of robust black anodized aluminum alloy, these adapters are corrosion-resistant, built-to-last, yet lightweight—giving you a reliable mounting solution without adding any bulk or weight.

The 1/4” female thread at the bottom can attach to any standard light stand. Simple installation screw the adapter into any device with the 1/4” thread or secure it on the camera’s cold shoe bracket with the knurled thumbscrews.
BrandNeewer #ad
ManufacturerNEEWER #ad
Height1.18 Inches
Length3.94 Inches
Weight0.33 Pounds
Width2.76 Inches
Part Number10100957
Model10100957