Top 10 Fan Controller Hub – Computer Case Fans

As an Amazon Associate I earn from qualifying purchases.



Occupying only One 4-pin Motherboard Header, Powering up to 10 Fans 3-pin Non-PWM or 4-pin PWM, DEEPCOOL FH-10 Integrated Fan Hub

DEEP COOL #ad - Only speed of Fan 1 can be identified by the system. If 3-pin non-pwm fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. Velcro and screw mountings applicable for the tower interiors. If 4-pin pwm fans are connected to this fan hub, duty ratio of all pwm fans can be adjusted at the same time. Capable of connecting to 10 PC fans simultaneously for cooling the computer system. They will run at FULL SPEED. That is, all pwm fans will run at the same DUTY RATIO. Powered by a stable sata connection to the system PSU for up to 10 fans.
BrandDEEP COOL #ad
ManufacturerDEEPCOOL #ad
Height1.18 Inches
Length8.39 Inches
Width4.41 Inches
Part NumberFH-10

2. Thermaltake


Thermaltake Commander FP SATA Powered 10 Port 4-Pin PWM Fan Hub AC-023-AN1NAN-A1

Thermaltake #ad - Direct sata power input: powers up to 9 PWM fans simultaneously from PSU to prevent stray current when the fan hub is in use. Included ties/velcro for easy placement: 5 reusable beaded cable ties, 2 velcro tabs, and one PWM signal cable that let users keep the cables neat and tidy and hold the fan hub steadily in place. Supports 10 4-pin independent fans :capable of connecting 10 PWM fans, the Commander FP enables users to optimally expand cooling capability within the chassis. Blue led power Indicator.
BrandThermaltake #ad
ManufacturerThermaltake USA Direct #ad
Height0.7 Inches
Length3.2 Inches
Weight0.1 Pounds
Width1.7 Inches
Part NumberAC-023-AN1NAN-A1
Warranty1 year warranty

3. 1 one enjoy


Support 10 Computer CPU Fans Splitter PWM, 1 one enjoy Thermalright PWM Fan Hub PC Case Fan Controller 4 Pin

1 one enjoy #ad - Only one saTA connection to the system. Compact design can save space and make the wire more tidy. 10-port fan hub: supports 10 pwm 4 pin fans at the same time. Only the speed of the red port can be identified by the system. Stable sata power input: simple and stable. Pwm function: each port has its own pwm function and the fan speed can be adjusted at the same time. Easy to install: double-sided adhesive for easy installation and more stable standing in the surface.
Brand1 one enjoy #ad
Manufacturer1 one enjoy #ad



DeepCool Fan Hub Control 4PWM Fan Speed Supports Fan with 3Pin/4Pin Cooling FH-04

DEEP COOL #ad - Double-sided adhesive Installation. Support PWM function. Compatible with 3-pin/4-pin fans. Support Cable management. 4-port fan hub.
BrandDEEP COOL #ad
ManufacturerDeepcool #ad
Height3.4 Inches
Length2.5 Inches
Weight0.1 Pounds
Width1 Inches
Part NumberFH-04
Warranty1 Year

5. Thermalright


Thermalright Integrated Fan Hub, SATA Power Cord Direct Input, 10-Port 4 Pin PC Fan Controller, Support up to 10 Fans, 5V Fan Hub

Thermalright #ad - Air volume: 82cfm max, wind pressure: 2. 1mm h2o max speed: 1850rpm±10%, higher air flow to enhance cooling performance. Designed for projects that requires cooling or ventilation; or as a replacement fan for various products.

The case fan square frame with excellent airflow and pressure performance: ideal for use on air cooling radiators. 4-pin pwm version with excellent balance of performance and quietness, supports automatic motherboard speed control. Size: 120*120*25mm, interface: 4pin pwm, noise ≤ 29. 6dba, current: 025a, voltage: 12v, dynamic equilibrium Designed for projects that requires.
BrandThermalright #ad
ManufacturerThermalright #ad
Height0.67 Inches
Length3.54 Inches
Width1.57 Inches
Part NumberTL-FAN-HUB-Controller

6. SinLoon


SinLoon 4 Knob Cooling Fan Speed Controller PC 8 Channels Fan Hub for CPU Case HDD VGA PWM Fan PCI Bracket 12V Fan Control- 4Pin Interface Power Supply 4 Pin 4Knob

SinLoon #ad - Material4 knob cooling fan speed Controller adopts plastic and metal materials, reliable, durable, with low loss and low heat. Knob adjust4 knob cooling fan Speed Controller, This cooling fan hub is equipped with the independent speed controller.

Save spacesinloon pc 8 channels fan hub the governor is installed in the PCI position of the chassis, which is convenient for installation and does not take up space. Increase speed to reduce computer part temperature when computer parts are busy. Functionpc 8 channels fan hub reduce speed to reduce noise & power consumption when computer parts are free. Universalwidely used for pc computer water cooling system, easy to install. Fan interface: 4piN 3PIN Can be connected. Power supply Interface: 4Pin interface.
BrandSinLoon #ad
Manufacturermandyyan #ad
Part Number22



Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller

ELECTOP #ad - So, that designated by the system for that fan. Please note 4pin fan speed can be adjusted by temperature control. Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.

There is eva double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. If the chassis fan is configured in bios to run at 50%, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the "source" fan. Since the mainboard can only receive one rotation speed signal, but no speed signal. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.

In the hub interfaces, the remaining nine conventional fan interfaces have the PWM function, the RED CPU interface is the CPU fan dedicated interface with speed detection function. The ten fans will spin at the same speed, you will have 10 fans at 50%. Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. For both 4-pin and 3-pin fans. You can connect to the CPU fan lead on the system board or the chassis fan lead. Red is expected to be a pass through for the cpu fan.
BrandELECTOP #ad
ManufacturerElectop #ad
Part NumberCPUCOOL-1-10-4P



Chassis Fan Hub, SATA 1 to 8 Way12V 3 PIN Cooling Fan Splitter Controller Hub 3 Pin PWM for PC Desktop Computer Motherboard12V 3-Pin

GELRHONR #ad - 8 way without speed measurement and pwm function, start the fan at full speed LOW or low speed LOW, you can manually adjust the gear position, or turn off the fan. It can be used to fix the hub in the chassis.

Suit for 12v 3pin fan 8 channels. Using sata interface. Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire. Easy installation:it is very easy to setup. Sata cooling fan splitter suit for 12v 3pin fan 8 channels. Using sATA interface. Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire.

Built-in double-sided adhesive: this compact HUB easily fits inside your pc case. Connect your rgb items to the hub, connect the included cable to any pin on the hub then connect the other end to any RGB header on your motherboard and lastly connect a SATA cable from your PSU to the hub to provide power.
ManufacturerLEIHONG #ad
Height0.75 Inches
Length2.13 Inches
Width1.93 Inches
Part NumberLH-084

9. SilverStone Technology


SilverStone Technology Silverstone 8-Port PWM Fan Hub/Splitter for 4-Pin & 3-Pin Fans in Black SST-CPF04-USA Newest Version

SilverStone Technology #ad - Pwm 4pin header x 8, compatible with 3pin cable Speed control function is unavailable for 3 pin fans. Compact size at only 54mm w x 19mm H x 40mm D. 1-to-8 pwm connectors. 2200μf capacitor provides stable voltage. Included 3m adhesive to apply anywhere within your case. Support speed detection for accurately controlling fans. Attached 3 pin fans will run at maximum RPM.
BrandSilverStone Technology #ad
ManufacturerSilverStone Technology #ad
Height1.57 Inches
Length2.13 Inches
Weight0.1 Pounds
Width0.75 Inches
Part NumberSST-CPF04-USA
Warranty1 Year Parts and Labor

10. Aurofyx


PC Fan Splitter Controller Used 6Pin Power with Rotary Switch and 8 X 4Pin Port, PWM Fan Hub

Aurofyx #ad - Easy to use: no drive, plug-and-play. Connect your rgb or fans connector to any pin on the hub, then connect from the PSU to the hub to provide power supply. Connector tab removable, If you have any questions, please feel free to contact us.

Note that the total power depends on the power of the chassis power supply, The maximum total power are 300W, Powered by motherboard or power supply. 1 to 8 fan pwm splitter: ours fan hub can be connected to 8 fans, support 4pin interface fan, with speed control function can also be used as a fan hub conrtoller. The speed can be adjusted at will. High-performance pc fan hub: single fan maximum power are 60w, 4-wire fan or 3-wire with PWM speed control port can be used. Save space: the rotary switch with 20cm cable can be installed in any position of the PC case. With sided tape, can fix the governor firmly inside the chassis.
BrandAurofyx #ad
ManufacturerAurofyx #ad
Height0.8 Inches
Length2.5 Inches
Width2 Inches
Part Number01