Top 10 CMT router Bits – Joinery Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. CMT

#ad

CMT 800.626.11 2-Piece Tongue & Groove Set, 1/2-Inch Shank

#ad
CMT #ad - Anti-kickback design, Non-Stick Orange Shield Coating. 3 sinterhip hi-density Industrial Chrome Carbide cutting edges for long-lasting performance. For cutting plywood, hardwood/softwood on router tables only Not for use on hand-held routers. Cmt bits were rated the best overall in comparison to other brand Test by Wood Magazine. 3/4-inch cutting length, 1/2-inch cutting depth, 1-7/8-Inch Cutting Diameter, 2-51/64-Inch Length.
BrandCMT #ad
ManufacturerCMT #ad
Height1.88 Inches
Length3.83 Inches
Weight0 Pounds
Width1.88 Inches
Part Number800.626.11
Model800.626.11
WarrantyCMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment.

2. CMT

#ad

CMT 835.001.11 Rabbeting Set, 1/4-Inch Shank

#ad
CMT #ad - Made of super-strength steel to enhance durability. Bit, bearings and hex key are included. 2 sinterhip hi-density Industrial Chrome Carbide for long-lasting performance. Cutting depth 1/8 to 1/2-inch by replacing bearing, 1-3/8-Inch Diameter & 1/2-Inch Cutting Length. Anti-kickback design.
BrandCMT #ad
ManufacturerCMT #ad
Height2 Inches
Length6 Inches
Width2 Inches
Part Number835.001.11
Model835.001.11
WarrantyLimited Lifetime Warranty: CMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits.

3. CMT

#ad

1/4-Inch Shank, 1/2-Inch Cutting Length, CMT 807.128.11 3-in-I Flush Trim Bit for MDF & Laminates

#ad
CMT #ad - Super-strength superior steel, Non-Stick Orange Shield Coating. Cmt bits were rated the best overall in comparison to other brand Test by Wood Magazine. 2 sinterhip hi-density Industrial Chrome Carbide cutting edges. 1/2-inch cutting diameter, 2-9/64-Inch Length Ideal on plastic laminates and aluminum laminates. Non-freezing delrin Bearing reduces the chance of bearing failure and doesn't ruin work surface.
BrandCMT #ad
ManufacturerCMT #ad
Height0.75 Inches
Length3.41 Inches
Weight0.13 Pounds
Width0.75 Inches
Part Number807.128.11
Model807.128.11
WarrantyLimited Lifetime Warranty as outlined on page 23 in the 2007 CMT price list.

4. CMT

#ad

Carbide-Tipped, 1/2-Inch Shank, 2-3/4-Inch Diameter, CMT 855.503.11 Lock Miter Bit

#ad
CMT #ad - Non-stick orange shield Coating, Anti-Kickback Design, Equipped with Bearing. 1-1/4-inch cutting length, material 5/8 to 1-1/8-Inch thick, 45┬░cutting angle, 2-49/64-Inch Length. Create boxes, stretcher bars, frames and any assortment of right angle or parallel joint projects. 2 sinterhip hi-density Industrial Chrome Carbide cutting edges for long-lasting performance. Ideal for milling miter joints in 1-1/8-Inch stock Use on router tables only.
BrandCMT #ad
ManufacturerCMT #ad
Height2 Inches
Length2 Inches
Weight0.5 Pounds
Width2 Inches
Part Number855.503.11
Model855.503.11
WarrantyLimited Lifetime Warranty: CMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits.

5. CMT

#ad

CMT 663.004.11 Insert Carbide Spoilboard surfacing router Bit with 2-3/8" Diameter and 12mm x 50mm Shank

#ad
CMT #ad - Use on soft and hard woods, particle board and MDF. The router bit utilizes 4-sided solid carbide inserts. For fast removal of material over a large surface area leaving an improved finish at the bottom of the cut. Super-strength steel body, 3 cutting edges. Insert carbide spoil board surfacing router bit ideal for fast removal of material over a large surface area. Used on soft and hard woods, particle board and MDF. Cost effective solution compared to brazed router bits and solid carbide spiral bits.
BrandCMT #ad
ManufacturerCMT USA, Inc. #ad
Height2.36 Inches
Length3.14 Inches
Width2.36 Inches
Part Number663.004.11
Model663.004.11

6. CMT

#ad

CMT 190.508.11 Solid Carbide Up/Downcut Spiral Bit, 1/2-Inch

#ad
CMT #ad - 2+2 cutting edges. For cutting, copying, sizing and routing wood products, plastic & laminates. For use on machining centers, point to point machines, CNC routers. 1-5/8-inch cutting length, 5/8-inch Minor Cutting Length, 42-Inch Overall Length. Also for use on hand-held routers equipped with chucks or adaptors. Premium quality solid Carbide. Excellent finish on both the workpiece upper/lower side.
BrandCMT #ad
ManufacturerCMT #ad
Height2 Inches
Length4 Inches
Weight0.35 Pounds
Width2 Inches
Part Number190.508.11
Model190.508.11
WarrantyCMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment.

7. CMT

#ad

1/8-Inch Cutting Length and 1/2-Inch Shank, CMT 822.332.11B 3-Wing Slot Cutter with Bearing and Arbor

#ad
CMT #ad - 1-7/8-inch diameter, 1/2-inch cutting Depth, 2-43/64-Inch Overall Length. 3 hi-density Carbide cutting edges. Equipped with a bearing for easy efficient template work. Great for splines, biscuits, T-molding & more applications. Anti-kickback design and PTFE coating to protect your tool from pitch and resin buildup.
BrandCMT #ad
ManufacturerCMT #ad
Height0.08 Inches
Length1.88 Inches
Width1.88 Inches
Part NumberCMT 822.332.11B
Model822.332.11B

8. CMT

#ad

CMT 837.350.11 Cove Bit, Carbide-Tipped, 1/4-Inch Shank, 1/2-Inch Radius

#ad
CMT #ad - Turn your furniture, doors, and drawer fronts from simple to elegant by giving them a final touch. Anti-kickback design, Non-Stick Orange Shield Coating, Equipped with a bearing. Cmt bits were rated the best overall in comparison to other brand Test by Wood Magazine. 1-1/2-inch diameter, 5/8-inch cutting Length, 2-9/32-Inch Overall Length. 2 sinterhip hi-density Industrial Chrome Carbide cutting edges for long-lasting performance.
BrandCMT #ad
ManufacturerCMT #ad
Height1.25 Inches
Length2.14 Inches
Weight1 Pounds
Width1.25 Inches
Part Number837.350.11
Model837.350.11
WarrantyLimited Lifetime Warranty: CMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits.

9. CMT

#ad

CMT 835.502.11 Rabbeting Set, 1/2-Inch Shank

#ad
CMT #ad - 5/8-inch cutting depth, 2-inch Diameter, 7/8-Inch Cutting Length. 2 sinterhip hi-density Industrial Chrome Carbide for long-lasting performance. For rabbeting of different size on wood and wood composites. Anti-kickback design. Bit, bearings and hex key are included.
BrandCMT #ad
ManufacturerCMT #ad
Height2 Inches
Length6 Inches
Weight0.55 Pounds
Width2 Inches
Part Number835.502.11
Model835.502.11
WarrantyLimited Lifetime Warranty: CMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits.

10. CMT

#ad

CMT 812.064.11, Solid Carbide Straight Bit, 1/4-Inch Diameter,Orange, 1/4-Inch Shank

#ad
CMT #ad - Smooth and precise cut Exceptional chip ejection to allow cleaner and more constant cutting. Makes right-angle joints, rabbets, union, box joints, mortise and tenons, tongue and groove joints. Cmt bits were rated the best overall in comparison to other brand Test by Wood Magazine. To be used on wood and wood composites. 1-inch cutting length, 2-3/8-Inch Length, 2 Cutting Edges.
BrandCMT #ad
ManufacturerCMT #ad
Height3 Inches
Length1 Inches
Weight0.1 Pounds
Width3 Inches
Part Number812.064.11
Model812.064.11
WarrantyLimited Lifetime Warranty: CMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits.